- Factorization of Polynomials to Linear/Quadratic Factors
- Method of Undetermined Coefficients
- Substitution Method
- Multiplication Method
- Heaviside Cover-up Method
- Partial Fraction Decomposition through Mathematical Software
- Problems

Before we start, we emphasize not to forget the following steps before decomposing the fraction:

- Ensure the numerator and denominator are both polynomials.
- Ensure the numerator of the fraction has an order less than the denominator.
- Ensure the denominator is completely reduced to irreducible factors.

Irreducible factor in denominator | Term in decomposition |
---|---|

$ax+b$ | $\frac{C_1}{ax+b}$ |

$(ax+b)^n$ | $\frac{C_1}{ax+b}+\frac{C_2}{(ax+b)^2}+...+\frac{C_n}{(ax+b)^n}$ |

$ax^2+bx+c$ | $\frac{C_1x+D_1}{ax^2+bx+c}$ |

$(ax^2+bx+c)^n$ | $\frac{C_1x+D_1}{ax^2+bx+c}+\frac{C_2x+D_2}{(ax^2+bx+c)^2}+...+\frac{C_nx+D_n}{(ax^2+bx+c)^n}$ |

## Factorization of Polynomials to Linear/Quadratic Factors

Any polynomial can be represented by the product of irreducible, real linear and quadratic factors. This is the result of the fundamental theorem of algebra. The factorization of the rational denominator is required before partial fraction decomposition can commence. There are a few methods to do so, involving the rational root theorem to find linear factors with rational roots. However, this is somewhat restrictive. A more general method for factorizing any polynomial is to first solve (often graphically) for the roots to find the linear factors. After dividing the polynomial by all determined linear factors, the remaining function should be a product of solely irreducible quadratics. The coefficients for the quadratics are found by solving a system of nonlinear equations. This method is best illustrated with a comprehensive example.

Example: Reduce the polynomial into irreducible linear and quadratic factors with real coefficients. $$f(x)=2x^7-9x^6+31x^4-21x^3+24x^2-9x+54$$ At first, this looks extremely intimidating, but initial factorization is simple. Graph the polynomial and it is immediately obvious that two roots exist: $x=-2$ with a multiplicity of 1 and $x=3$ with a multiplicity of 2. Therefore, the linear factors, which are comprised of the real roots, are $x+2$ and $(x-3)^2$ (multiplicity is incorporated as a power). Long division of $f(x)$ with the product of the linear factors produces $g(x)=2x^4-x^3+2x^2+3$. With an order of 4, this function is therefore a product of two quadratics. We denote these two quadratics as: \begin{align*} ax^2+bx+c\\ ux^2+vx+w\end{align*} Multiplying the two polynomials and setting it equal to $g(x)$ results in: $$(au)x^4+(av+bu)x^3+(aw+bv+cu)x^2+(bw+cv)x+cw=2x^4-x^3+2x^2+3$$ Comparison of coefficients yields: \begin{align*} au&=2 \\ av+bu&=-1 \\ aw+bv+cu&=2 \\ bw+cv&=0 \\ cw&=3\end{align*} There are five equations and six unknowns yielding one degree of freedom. We arbitratily set $a=1$ making $u=2$ through the first equation. With some algebra, it can be shown that there are two sets of polynomials that satisfy the equations above. One solution produces the two polynomials $x^2+x+1$ and $2x^2-3x+3$. So, the final answer is: $$f(x)=(x-3)^2(x+2)(x^2+x+1)(2x^2-3x+3)$$ It is significantly easier to do this factorization through a mathematical software. MATLAB provides a function,
Output:

Example: Reduce the polynomial into irreducible linear and quadratic factors with real coefficients. $$f(x)=2x^7-9x^6+31x^4-21x^3+24x^2-9x+54$$ At first, this looks extremely intimidating, but initial factorization is simple. Graph the polynomial and it is immediately obvious that two roots exist: $x=-2$ with a multiplicity of 1 and $x=3$ with a multiplicity of 2. Therefore, the linear factors, which are comprised of the real roots, are $x+2$ and $(x-3)^2$ (multiplicity is incorporated as a power). Long division of $f(x)$ with the product of the linear factors produces $g(x)=2x^4-x^3+2x^2+3$. With an order of 4, this function is therefore a product of two quadratics. We denote these two quadratics as: \begin{align*} ax^2+bx+c\\ ux^2+vx+w\end{align*} Multiplying the two polynomials and setting it equal to $g(x)$ results in: $$(au)x^4+(av+bu)x^3+(aw+bv+cu)x^2+(bw+cv)x+cw=2x^4-x^3+2x^2+3$$ Comparison of coefficients yields: \begin{align*} au&=2 \\ av+bu&=-1 \\ aw+bv+cu&=2 \\ bw+cv&=0 \\ cw&=3\end{align*} There are five equations and six unknowns yielding one degree of freedom. We arbitratily set $a=1$ making $u=2$ through the first equation. With some algebra, it can be shown that there are two sets of polynomials that satisfy the equations above. One solution produces the two polynomials $x^2+x+1$ and $2x^2-3x+3$. So, the final answer is: $$f(x)=(x-3)^2(x+2)(x^2+x+1)(2x^2-3x+3)$$ It is significantly easier to do this factorization through a mathematical software. MATLAB provides a function,

*factor*, that can be used for this purpose.syms x F = factor(2*x^7-9*x^6+31*x^4-21*x^3+24*x^2-9*x+54)

```
F = [ x + 2, x^2 + x + 1, 2*x^2 - 3*x + 3, x - 3, x - 3]
```

## Method of Undetermined Coefficients

This method is often used as a fail-safe method for decomposing fractions. The unknown coefficients of the decomposed fractions are solved by forcing the partial fraction decomposition into a form synonymous with the original function. This function will have the same denominator as the original function, with unknown variables all in the numerator. The unknown coefficients are subsequently solved through comparing the two functions' numerators. Consider the function:
$$f(x)=\frac{4x^2+6x+6}{x^3-7x-6}$$
By factorizing the denominator through the method described in the previous section, we end up with the following:
$$f(x)=\frac{4x^2+6x+6}{(x-3)(x+1)(x+2)}$$
The partial fraction decomposition of the function, let's call $g(x)$, is:
$$g(x)=\frac{A}{x-3}+\frac{B}{x+1}+\frac{C}{x+2}$$
Note that we are solving for the unknown parameters $A,B,C$ to make $f(x)$ and $g(x)$ equal. First, combine the partial fractions into one fraction. This is done by first making the denominators of the individual partial fractions the same as the original function's denominator.
$$g(x)=\frac{A}{x-3} \times \frac{(x+1)(x+2)}{(x+1)(x+2)}+\frac{B}{x+1} \times \frac{(x-3)(x+2)}{(x-3)(x+2)}+\frac{C}{x+2} \times \frac{(x-3)(x+1)}{(x-3)(x+1)}$$
We've merely multiplied all the fractions by one, since the multiplying factors all have the same numerator and denominator.
$$g(x)=\frac{A(x+1)(x+2)}{(x-3)(x+1)(x+2)}+\frac{B(x-3)(x+2)}{(x-3)(x+1)(x+2)}+\frac{C(x-3)(x+1)}{(x-3)(x+1)(x+2)}$$
$$=\frac{A(x+1)(x+2)+B(x-3)(x+2)+C(x-3)(x+1)}{(x-3)(x+1)(x+2)}$$
At this point, comparing the numerator with the original function's numerator is not useful. We need to force it into the same rational form as the original function's numerator. Thus, we need to simplify the numerator into the form $c_1x^2+c_2x+c_3$. Fortunately this is relatively straightforward but requires some algebra:
$$g(x)=\frac{A(x^2+3x+2)+B(x^2-x-6)+C(x^2-2x-3)}{(x-3)(x+1)(x+2)}$$
$$=\frac{Ax^2+3Ax+2A+Bx^2-Bx-6B+Cx^2-2Cx-3C}{(x-3)(x+1)(x+2)}$$
$$=\frac{(A+B+C)x^2+(3A-B-2C)x+(2A-6B-3C)}{(x-3)(x+1)(x+2)}$$
The denominator of both functions $f(x)$ and $g(x)$ are the same, meaning that if the numerators are the same, then the two functions are equal!
$$(A+B+C)x^2+(3A-B-2C)x+(2A-6B-3C)=4x^2+6x+6$$
Now that both sides are in the same form, that is, a polynomial of order 2, all that is needed for the numerators to be the same is for the coefficient on the left side to match up with the coefficients on the right hand side. Let us represent this equality slightly differently:
\begin{alignat*}{2}(A+B+C)x^2&{}+{}&(3A-B-2C)x&{}+{}&(2A-6B-3C)\\=4x^2&{}+{}&6x&{}+{}&6\end{alignat*}
It is now evident that for the coefficients to match up:
\begin{alignat*}{2}&A&{}+{}&&B&{}+{}&&C&{}={}&4 \label{eq:1} \tag{1}\\
3&A&{}-{}&&B&{}-{}&2&C&{}={}&6 \label{eq:2} \tag{2}\\
2&A&{}-{}&6&B&{}-{}&3&C&{}={}&6 \label{eq:3} \tag{3}\end{alignat*}
The first step in solving this system is to subtract equation \ref{eq:2} by equation \ref{eq:3} then by \ref{eq:1} to get $B=-1$. Then multiply equation \ref{eq:1} by 2 and subtract \ref{eq:3} by \ref{eq:1}, yielding $C=2$. Plug in $B$ and $C$ into equation \ref{eq:1} to get $A=3$.
Therefore:
$$f(x)=\frac{3}{x-3}-\frac{1}{x+1}+\frac{2}{x+2}$$
This method of solving for the unknowns in the partial fraction decomposition works all the time for any sort of partial fraction decomposition. However it is clear that it requires a lot of algebra and thus there is a greater chance calculation errors may arise.

## Substitution Method

Consider the previous function again and its partial fraction expansion:
$$\frac{4x^2+6x+6}{(x-3)(x+1)(x+2)}=\frac{A}{x-3}+\frac{B}{x+1}+\frac{C}{x+2}$$
It is important to realize that the equality above must hold for all values of $x$ in the original function's domain. Thus, by simply substituting three arbitrarily different values of $x$ into the equation above, we can derive a system of three equations of $A,B,C$ and solve accordingly. This results in a system of equations that is determined quicker than the previous Method of Undetermined Coefficients. However, a system of equations is still needing to be solved, and for large system of equations, this is very tedious. This method is rarely used to do a complete partial fraction decomposition, however it is used in conjunction with other methods and so the concept is important to understand.

## Multiplication Method

This method solves for parameters without necessarily needing to solve systems.
Consider the previous function again and its partial fraction expansion:
$$\frac{4x^2+6x+6}{(x-3)(x+1)(x+2)}=\frac{A}{x-3}+\frac{B}{x+1}+\frac{C}{x+2}$$
To solve for $A$, multiply both sides of the equation above by the denominator $x-3$ associated with $A$. Take note that when $x=3, x-3$ is equal to zero.
$$\frac{4x^2+6x+6}{(x+1)(x+2)}=A+\frac{B(x-3)}{x+1}+\frac{C(x-3)}{x+2}$$
Now, set $x=3$ as previously found. Parameters $B$ and $C$ are now cancelled with the substitution as they are both multiplied by zero. While using this method, make sure there are no divisions by zero!
$$\frac{4(3)^2+6(3)+6}{(3+1)(3+2)}=A+\frac{B(3-3)}{3+1}+\frac{C(3-3)}{3+2}$$
$$\frac{60}{20}=A+0+0$$
$$\therefore A=3$$
Similarly, $B$ and $C$ are found the same way.

Now, let's consider another more complicated partial fraction. Consider the function and its partial fraction expansion: $$\frac{6x^2+9x+3}{(x-1)(x+2)^2}=\frac{A}{x-1}+\frac{B}{x+2}+\frac{C}{(x+2)^2} \label{eq:4} \tag{4}$$ $A$ can be found through this method. The steps for showing $A=2$ is omitted. However, note we cannot solve for $B$ using this method. If we proceed to solve for $B$ using this method, we first need to multiply both sides by $x+2$. $$\frac{6x^2+9x+3}{(x-1)(x+2)}=\frac{A(x+2)}{x-1}+B+\frac{C}{x+2}$$ If we substitute $x=-2$, we get a division by zero on the left and right-hand side. However, if we instead solve for $C$, multiplying both sides by $(x+2)^2$ yields: $$\frac{6x^2+9x+3}{x-1}=\frac{A(x+2)^2}{x-1}+B(x+2)+C$$ Substituting $x=-2$ now works: $$\frac{6(-2)^2+9(-2)+3}{-2-1}=\frac{A(-2+2)^2}{-2-1}+B(-2+2)+C$$ $$\therefore C=\frac{9}{-3}=-3$$ To solve for $B$, one may use the Method of Undetermined Coefficients, however it is easier in this case just to use the Substitution method and substitute one number into equation \ref{eq:4}. Any number that does not result in a division by zero can be substituted, so we substitute $x=-1$, which is the root of the numerator in the original function. Note this value is in the domain of the original function. There is no division by zero as a result and the left-hand side of equation \ref{eq:4} goes to zero: $$0=\frac{A}{-1-1}+\frac{B}{-1+2}+\frac{C}{(-1+2)^2}$$ Values of $A$ and $C$ have already been solved using the Multiplication method. $$0=\frac{2}{-1-1}+\frac{B}{-1+2}-\frac{3}{(-1+2)^2}$$ $$\therefore B=1+3=4$$ $$\frac{6x^2+9x+3}{(x-1)(x+2)^2}=\frac{2}{x-1}+\frac{4}{x+2}-\frac{3}{(x+2)^2}$$

For fractions where the denominator has quadratics or quadratic terms raised to a power,

Complex number algebra may be a bit tedious so in this case, the Method of Undetermined Coefficients to solve for $B$ and $C$ may have produced a quicker answer. However, if a fraction has many linear factors in its denominator and only one or two quadratic terms, this method for partial fraction decomposition may be faster compared to the Method of Undetermined Coefficients since this method does not require the tedious step of combining all partial fractions into one fraction.

With the same analysis, it can be shown that

Now, let's consider another more complicated partial fraction. Consider the function and its partial fraction expansion: $$\frac{6x^2+9x+3}{(x-1)(x+2)^2}=\frac{A}{x-1}+\frac{B}{x+2}+\frac{C}{(x+2)^2} \label{eq:4} \tag{4}$$ $A$ can be found through this method. The steps for showing $A=2$ is omitted. However, note we cannot solve for $B$ using this method. If we proceed to solve for $B$ using this method, we first need to multiply both sides by $x+2$. $$\frac{6x^2+9x+3}{(x-1)(x+2)}=\frac{A(x+2)}{x-1}+B+\frac{C}{x+2}$$ If we substitute $x=-2$, we get a division by zero on the left and right-hand side. However, if we instead solve for $C$, multiplying both sides by $(x+2)^2$ yields: $$\frac{6x^2+9x+3}{x-1}=\frac{A(x+2)^2}{x-1}+B(x+2)+C$$ Substituting $x=-2$ now works: $$\frac{6(-2)^2+9(-2)+3}{-2-1}=\frac{A(-2+2)^2}{-2-1}+B(-2+2)+C$$ $$\therefore C=\frac{9}{-3}=-3$$ To solve for $B$, one may use the Method of Undetermined Coefficients, however it is easier in this case just to use the Substitution method and substitute one number into equation \ref{eq:4}. Any number that does not result in a division by zero can be substituted, so we substitute $x=-1$, which is the root of the numerator in the original function. Note this value is in the domain of the original function. There is no division by zero as a result and the left-hand side of equation \ref{eq:4} goes to zero: $$0=\frac{A}{-1-1}+\frac{B}{-1+2}+\frac{C}{(-1+2)^2}$$ Values of $A$ and $C$ have already been solved using the Multiplication method. $$0=\frac{2}{-1-1}+\frac{B}{-1+2}-\frac{3}{(-1+2)^2}$$ $$\therefore B=1+3=4$$ $$\frac{6x^2+9x+3}{(x-1)(x+2)^2}=\frac{2}{x-1}+\frac{4}{x+2}-\frac{3}{(x+2)^2}$$

**Therefore, for the partial fractions that result from repeated linear factors, the Multiplication Method should be used on the associated partial fraction with the denominator raised to the highest power. This method cannot be solely used to solve for the other factors raised to a lower power.**For fractions where the denominator has quadratics or quadratic terms raised to a power,

*all*unknown parameters can be calculated with this method since a division by zero is mitigated. However, the use of complex numbers is required. For example, observe the function and its decomposition below: $$\frac{-x^2 + 3 x - 11}{(x - 2) (x^2 - 2 x + 3)}=\frac{A}{x-2}+\frac{Bx+C}{x^2-2x+3}$$ $A$ is solved easily to yield $A=-3$. To solve for $B$ and $C$, multiply both sides by $x^2-2x+3$. $$\frac{-x^2 + 3 x - 11}{x - 2}=\frac{A(x^2-2x+3)}{x-2}+Bx+C$$ The roots to $x^2-2x+3$ are $1+i\sqrt{2}$ and $1-i\sqrt{2}$. For the first root: $$\frac{-(1+i\sqrt{2})^2+3(1+i\sqrt{2})-11}{1+i\sqrt{2}-2}=\frac{A(0)}{x-2}+B(1+i\sqrt{2})+C$$ $$\frac{-7+i\sqrt{2}}{-1+i\sqrt{2}}=B(1+i\sqrt{2})+C$$ $$3 + 2 i \sqrt{2}=B(1+i\sqrt{2})+C \label{eq:5} \tag{5}$$ At this point, we know $B$ and $C$ must be real numbers, so that automatically forces $B$ to equal 2. Then it follows that $C=1$. A review of complex number operations is located here.Complex number algebra may be a bit tedious so in this case, the Method of Undetermined Coefficients to solve for $B$ and $C$ may have produced a quicker answer. However, if a fraction has many linear factors in its denominator and only one or two quadratic terms, this method for partial fraction decomposition may be faster compared to the Method of Undetermined Coefficients since this method does not require the tedious step of combining all partial fractions into one fraction.

With the same analysis, it can be shown that

**for partial fractions that result from repeated quadratic factors, the Multiplication Method should be used on the associated partial fraction with the denominator raised to the highest power. This method cannot be solely used to solve for the other factors raised to a lower power.**This is the same conclusion as the case for repeated linear factors.## Heaviside Cover-up Method

The Heaviside Cover-up Method uses the exact method as the Multiplication Method, but removes the intermediate algebra steps to drastically improve the time in solving for the unknown coefficients. It is especially useful for a partial fraction decomposition of many terms. However, it is important that the Heaviside Method has the same requirements presented in the multiplication method; this method works all the time for a decomposition with only linear factors but special exceptions apply for decompositions with other types of factors.
Using the same example as before,
$$\frac{4x^2+6x+6}{(x-3)(x+1)(x+2)}=\frac{A}{x-3}+\frac{B}{x+1}+\frac{C}{x+2}$$
The decomposition only involved linear factors, and so the Heaviside Cover-up method will work to solve for all parameters. Now, to solve for $A$, first notice that the denominator associated with $A$ in the partial fraction equals zero when $x=3$. Next, we simply 'cover up' or remove the factor $x-3$ associated with $A$ in the original function.
$$\frac{4x^2+6x+6}{\hphantom{(x-3)}(x+1)(x+2)}$$
Lastly, we plug in the $x$ value of 3 that we previously solved for and plug it into the remaining function.
$$A=\frac{4(3)^2+6(3)+6}{\hphantom{(x-3)}(3+1)(3+2)}=3$$
Solving for $B$ this time, $x=-1$ to solve for the root of the denominator $x+1$ associated with $B$. Next, 'cover up' $x+1$ from the original function.
$$\frac{4x^2+6x+6}{(x-3)\hphantom{(x+1)}(x+2)}$$
Substitute $x=-1$ into the remaining function.
$$B=\frac{4(-1)^2+6(-1)+6}{(-1-3)\hphantom{(x+1)}(-1+2)}=-1$$
Solve $C$ through the same way.
$$C=\frac{4(-2)^2+6(-2)+6}{(-2-3)(-2+1)\hphantom{(x+2)}}=2$$
Now, for the case of non-linear factors in the denominator:
$$\frac{4x^2-x-2}{x^2(x-1)}=\frac{A}{x}+\frac{B}{x^2}+\frac{C}{x-1}$$
Heaviside method can be used for the fractions with linear denominators as was the case in the multiplication method.
$$C=\frac{4(1)^2-1-2}{(1)^2\hphantom{(x-1)}}=1$$
The Heaviside method can be used for the partial fraction with the highest order denominator that resulted from the $x^2$ term:
$$B=\frac{4(0)^2-0-2}{\hphantom{x^2}(0-1)}=2$$
The substitution method / method of undetermined coefficients is used to solve for the last unknown parameter. Selecting an arbitrary value to substitute $x=2$,
$$\frac{4(2)^2-2-2}{2^2(2-1)}=\frac{A}{2}+\frac{B}{2^2}+\frac{C}{2-1}$$
$$3=\frac{A}{2}+\frac{2}{2^2}+\frac{1}{1}$$
which quickly shows that $A=3$. A table is conveniently provided below to list out restrictions when using the Heaviside method.

Irreducible factor in denominator | Heaviside method restriction |
---|---|

$ax+b$ | None. |

$(ax+b)^n$ | May only be used on associated partial fraction with denominator raised to highest power. |

$ax^2+bx+c$ | None, complex numbers required. May be quicker to use Method of Undetermined Coefficients. |

$(ax^2+bx+c)^n$ | May only be used on associated partial fraction with denominator raised to highest power. Complex numbers required. May be quicker to use Method of Undetermined Coefficients. |

## Partial Fraction Decomposition through Mathematical Software

Given the opportunity, this method is the easiest. MATLAB provides a function,
Output:

Use the optional second parameter to specify the independent variable. In the case of $\frac{a}{(x+a)(x+2)}$, $x$ is the independent variable and $a$ is a constant:
Output:

*partfrac*, that can be used. The function accepts the function, and optionally the independent variable. For the same function given first in the Methods of Undetermined Coefficient method $\frac{4x^2+6x+6}{x^3-7x-6}$, the partial fraction is calculated through the code:syms x f=partfrac((4*x^2+6*x+6)/(x^3-7*x-6))

`f = 2/(x + 2) - 1/(x + 1) + 3/(x - 3)`

Use the optional second parameter to specify the independent variable. In the case of $\frac{a}{(x+a)(x+2)}$, $x$ is the independent variable and $a$ is a constant:

syms x a f=partfrac(a/((x+a)*(x+2)),x)

`f = a/((a - 2)*(x + 2)) - a/((a + x)*(a - 2))`

## Problems

- Decompose $f(x)=\frac{4x^2+6x+8}{x^2(x+4)}$ into partial fractions using all the methods shown.
- Decompose $f(x)=\frac{a}{(x-b)(x-c)}$ into partial fractions, where $a,b,c$ are real numbers and $b \neq c$.

nice

ReplyDeletepg slot ซื้อฟรีสปิน ซื้อฟีเจอร์ดีอย่างไร มีเกมที่ของ pg slot ที่ซื้อฟรีสปินได้บ้าง วันนี้เรา ได้ยก 10 เกมที่สามารถซื้อฟีเจอร์ฟรีสปินได้ ไปดูกันว่า การซื้อฟีเจอร์ดีอย่างไร คุ่มค่าแค่ไหน

ReplyDelete